RVS TECHNOLOGY® Gasoline Engine Treatment


You can improve the fuel economy, endurance and ecology of your engine very easily.

The product family is intended for treating gasoline (petrol) engines. You can read a technical description of the RVS Technology below under the Overview header.

You can do it even in a parking lot: Mix the contents of the package together. Add half of the mixture into a warm engine, let the engine idle for 15 minutes, and pour the rest of the mixture into it. Start the engine and drive or let it idle for at least 30 to 40 minutes. That’s how easy it is! More detailed instructions are included in the package.

You can find the oil volume of the engine in the user’s manual of the vehicle. If the oil volume is more than 9 litres, G4 and G6 products can be combined and used in an engine with an oil volume of 10 litres, two G6 products can be used for treating an engine with an oil volume of 12 litres etc. Correspondingly, for treating a 250-cc 2-stroke engine you need two packages of the 2-Stroke 125 product. A 2-stroke engine product can also be divided: with one package of 2-Stroke 125 product you can treat two 50-cc engines. (Attention! We do not recommend dividing products for treating 4-stroke engines.)

  • 2-Stroke 125: For two-stroke 125-cc engines.
  • 2-Stroke 500: For two-stroke 500-cc engines.
  • G2: For gasoline engines with an oil capacity up to 2 litres.
  • G4: For gasoline engines with an oil capacity up to 4 litres.
  • G6: For gasoline engines with an oil capacity up to 6 litres.
  • G8: For gasoline engines with an oil capacity up to 9 litres.
  • GIP3: For gasoline engine injection systems.
  • Total Productive Maintenance System (TPMS)
  • Preventive Protection Maintenance System (PPMS)
  • Auto-reactive method
  • Long-term effect

RVS Technology® is a technique that has the capacity to form a Triboceramic surface structure on metal friction contact zones (metal-ceramic), while the mechanism is in its normal productive operation. RVS has unique properties; it protects and prevents the surfaces and mechanisms of wear and tear. RVS is the only technology that has the ability to restore sliding surfaces, in good case, up to their original shape and tolerances. The new surface structure takes place autoreactively, without disassembling the equipment being restored. In practice this means, without down times and loss of production. Furthermore, the effect lasts for a long time: in normal cases in automobile engines for approximately 100,000 kms (~60,000 miles)

The core of the technology is its ability to identify objects and points prone to wear and damage by “locating” the source of the thermal energy (heat) produced by the friction and its capacity to modify these friction surfaces. The process ceases automatically as the required result is obtained.

The thickness of the born structure depends on the wear rate and the hardness on the surface pressure during the process.

The clearances in every friction pair in the mechanism are optimised to a level hard to achieve by current application methods. All this takes place without down times and needs for expensive spare parts and costs of logistic, handling or remote processing. The result is a reliable mechanism for a long time.

  • Takes place productively and automatically
  • No disassembly, handling or remote processing
  • No costly and time consuming Down Times
  • Prolonges life cycle of components (30–70 %)
  • Reduces replacement demand of costly spareparts as wear process almost stops
  • Reduces number of expensive down times and maintenance hours / days
  • Improves predictability of mechanism function
  • Reduces energy & fuel consumption (5–10 %)
  • Reduces emissions – Reduced environmental strain (10–30 %)
  • Reduces vibration & noise level (10–50 %)
  • Prolonges life cycle of lubricants (30–50 %)
  • Possibility to use less expensive lubricants with less additives
  • Less corrosion problems
  • Survival of the mechanism in case of accidental loss of lubricant!

It is recommended not to postpone the second treatment further as the dirt removed from the surfaces being treated starts to stick back on the cleaned surfaces.

Drive the vehicle in the sequel as usual for approximately 300–400 kms (200–250 miles) but avoid heavy engine loading (run-in). SWITCH KM AND MILES

Pour the rest of the mixture in the bottle into the engine.


1st TREATMENT Less than 25,000 miles / 800 hours
2nd TREATMENTIf more than 25,000 miles / 800 hours

Step 01

Warm the engine up to its normal operating temperature.  Meanwhile squeeze the contents of the small tube into the bottle and close the cap of the bottle and Shake the bottle well (20–30 sec.) until the mixture is homogenous (The contents of the package should be at room temperature).

Step 02

Pour immediately half of the mixture into the engine and Let the engine idle for 15 minutes.

Step 03

Stop the engine for one minute.

Step 04

Shake the bottle well (20–30 sec.) and Pour the rest of the mixture in the bottle into the engine.

Drive the vehicle at least for 30 minutes avoiding heavy engine loading. When treating a motorcycle engine with united lubrication with the gearbox, use all the gears for equal intervals during this stage.

Drive the vehicle in the sequel as usual for approximately 300–400 kms (200–250 miles) but avoid heavy engine loading (run-in).

If your engine life has more than 25,000 miles or 800 hours it is recommended that you perform a 2nd treatment. It is recommended not to postpone the second
treatment further as the dirt removed from the surfaces being treated starts to stick back on the cleaned surfaces.

The 2nd treatment is applied the same way as the 1st treatment.

The treatment is complete after approximately 1500–2000 km (1000–1250 miles) (or 20 to 50 engine hours) counted from the second treatment.

A third treatment with a third package carried out similarly to the first and second ones may be useful for very worn engines.

What exactly is RVS Technology®?

RVS Technology® Tribo(nano-)Ceramics can be considered as an advanced mode of cure for engines, gearboxes, and other mechanisms. If your device has normal wear problems like noise, smoking, too high consumption of oil or fuel, decrease of power and compression level, unbalance and vibrations RVS Technology has the capacity to restore it.
RVS Technology works also as a preventive method, protecting your mechanisms against coming wear. For example treatment of car parts will protect your car from serious problems in the future.

What does RVS mean ?

Restores Vital Surfaces

Is RVS an oil additive?

No! Unlike oil additives on the market, RVS Technology® products produce a nano-ceramic layer that integrates with the metal friction surfaces of your engine, transmission, differential etc. That’s why it lasts at least 100,000 km (60,000 miles) and oil changes do not affect it. RVS does not affect the properties of oil. The idea of oil additives is to improve the oil properties and they have to be re-applied at every oil change.

What are cold starts and will your products help reduce/eliminate them?

Cold start is a phenomenon observed when an engine is started in cold weather – during the first few seconds, the oil is thick and oil pressure is low, and the engine is starved of oil – that causes parts inside to wear out due to the friction caused by lack of proper lubrication. The Triboceramic layer created by RVS Technology® protects the components inside an engine from this oil starvation because even without oil, the triboceramic layer is very slippery, thus minimizing the damage caused by cold starts.

Is RVS Technology just another oil additive?

No! Unlike oil additives on the market, RVS Technology® products produce a Triboceramic layer that integrates with the metal friction surfaces of your engine, transmission, differential etc. That’s why it lasts for 60,000 miles (100,000km) and oil changes do not affect it. The idea of oil additives is to improve the oil properties and have to be re-applied at every oil change.

Do I need to re-apply RVS Technology® at every oil change?

No! As mentioned above, our products react directly with the metal components, forming a Triboceramic layer that is durable and that becomes an integral part of the metal components. Oil changes do not affect the RVS Technology® treatment.

How do I know what is the right product for me?

Our products are categorized by the oil capacity of the device you are treating. If your engine holds 4 qts/liters of oil, you need a G4 treatment. If it holds 5, you need the next highest number – G6. An automatic transmission with 6 qts/liters of ATF needs a T6A, and so on. If you are unsure of the fluid capacities of your particular vehicle, they can usually be found in your owner’s manual, the link provided on our web page, or you can simply contact us and we will find it out for you!

Does RVS Technology® reduce the operating temperature of my engine?

Yes! Due to the lowered internal friction, the engine runs cooler after a RVS Technology® treatment. This can be beneficial in warm climates where vehicles are subjected to extreme heat.

My engine feels tired and has low compression. I was quoted $1800 for a rebuild. Can RVS Technology® help?

Yes! RVS Technology® can definitely help. The low compression and lack of power are usually caused by worn out cylinder walls. The Triboceramic layer created by RVS Technology® seals the gaps and restores compression/power potentially saving you thousands.

I’m getting really bad gas mileage. Can RVS Technology® improve it?

Yes, it can! The reasons for high gas mileage can be numerous. Regardless of the reason, you will notice an improvement after a full RVS Technology® treatment. The reduced mechanical friction allows your engine to run more efficiently. The result is typically a 5-12% improvement in gas mileage, casewise even more.

Can RVS Technology® be used in vehicles with synthetic oil?

Yes. RVS Technology® products are fully compatible with all types of oils.

Automaattilaatikkoni luistaa. Voivatko tuotteenne pelastaa sen?

Jos luistaminen johtuu venttiiliongelmasta, RVS saattaa auttaa, mutta jos vaihteisto luistaa siksi, että sen sisällä olevat levyt ovat kuluneet, RVS ei voi auttaa. Kitkalevyjen pinta on paperinkaltaista massaa
If it’s caused by a valve problem RVS may help, but if the transmission slips because the clutches inside of it are worn out RVS cannot help. The clutches have paper-kind of mass surfaces and RVS Technology® works only on metal parts. Sometimes the problem is caused by bad shifter solenoids, which is an electrical problem, and this case they need to be repaired/replaced accordingly.

If RVS Technology® doesn’t fix slippage in an automatic transmission, then how does it help?

There are many metal gears, bearings, and valves as well as an oil pump inside automatic transmissions that benefit from the effects of an RVS Technology® treatment. Friction surfaces of these parts are treated and the friction between them is reduced, allowing your transmission to operate smoother and quieter. Internal heat production that burns the oil and is the main cause for transmission failure is reduced, extending the life of the oil and transmission itself.

If RVS isn’t an oil additive product, why is the oil capacity such important information in choosing the products?

The oil capacity is comparatively easy to find out, and normally it defines sufficiently well how much there is to treat in the mechanism.
In industrial applications with external oil tanks and relatively low flow speed, other criteria are used for calculating the appropriate RVS Technology™ product amount.

How do you carry out the treatment procedures?

In treating mechanisms, you usually use the lubricant used in the mechanism as a carrier that delivers the RVS substance to its destination. In the simplest cases, you just pour the RVS substance into the device and use it as usual for a certain period of time. See detailed application instructions for different types of RVS Technology® products on the product page under different product groups. To apply RVS Technology® products in industrial equipment, contact us for instructions.

When is it best to treat an automobile engine, before or after an oil change?

Neither way is wrong. In new or almost new engines it doesn’t even make a big difference.

The higher the mileage, the dirtier the engine internals usually are. During the treatment procedure, dirt is removed from the surfaces and it gets to the oil. That’s why it is often recommendable to change the oil before the second treatment that we recommend for engines with a mileage higher than 40,000 km (~25,000 miles). Therefore the most optimal time for starting the RVS Technology® treatment procedures with a used engine is about 400 km (250 miles) before a scheduled oil change. The second treatment is then carried out after the oil change, and the RVS Technology® substance can be left in the engine until the following regular oil change.

Can the G4 product be used in a motorcycle with a wet clutch?

RVS Technology creates triboceramic surface on friction pairs, both surfaces of which are metallic. As one of two surfaces in mutual contact in wet clutches is a mass plate, RVS Technology doesn’t affect the clutch.

We have plenty of references on this topic in motorcycles, to name a few: Pekka Päivärinta (five-time world champion in sidecar racing) has used RVS Technology products in his racing bikes from the 2014 season (in his previous BMW S 1000 RR and Honda CBR 600 RR motors and the Yamaha YZF R6 engine used in the 2019 season). Markka Racing uses our products in all its bikes.

Can RVS products be used in differentials with a friction lock?

Yes, they can. When at least one of the surfaces is made of material other than metal the RVS substance does not react and it does not affect the surfaces in any way.

Part 1

Part 2

Part 3

  • 150 ml (5.1 oz) of oil
  • 11 ml (0.37 oz) of RVS gel
  • Step-by-step multilingual instruction booklet